496 Ho Exhaust Heat Sensor
05-09-2010, 08:46 PM
#1
Registered
Thread Starter
Join Date: Oct 2009
Location: Avon Lake, Ohio
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
496 Ho Exhaust Heat Sensor
I have a 2003 496 and have a bad heat sensor which is on order. Tomorrow I would like to start the engine after taking the boat out of winter storage and would like to avoid the buzzers and bells ringing. Can I simply cut the wires just before the exhaust manifold sensor and splice them together to complete the circuit and avoid the ringing?
05-09-2010, 10:52 PM
#2
Registered
iTrader: (2)
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
Fixx
I have a 2003 496 and have a bad heat sensor which is on order. Tomorrow I would like to start the engine after taking the boat out of winter storage and would like to avoid the buzzers and bells ringing. Can I simply cut the wires just before the exhaust manifold sensor and splice them together to complete the circuit and avoid the ringing?
