42 fountain
#12
Registered
Joined: Jun 2010
Posts: 2
Likes: 0
42' Fountian with staggard layout
http://www.classic-fiberglass.com/cl...lleryID=10&p=6
http://www.classic-fiberglass.com/cl...lleryID=10&p=9
http://www.classic-fiberglass.com/cl...lleryID=10&p=6
http://www.classic-fiberglass.com/cl...lleryID=10&p=9
Last edited by Classicfiberglas; 07-18-2010 at 11:07 PM.
#13
Registered
Joined: Jun 2006
Posts: 14,914
Likes: 1
From: Lake Conroe, TX.
42' Fountian with staggard layout
http://www.classic-fiberglass.com/cl...lleryID=10&p=6
http://www.classic-fiberglass.com/cl...lleryID=10&p=9
http://www.classic-fiberglass.com/cl...lleryID=10&p=6
http://www.classic-fiberglass.com/cl...lleryID=10&p=9
#14
I had the OHIO STEEL whick was a stagger setup. The motor staggar was a full 48" plus the rear tranny had a driveshaft of 12".
The engine compartment was liklely custom but it was every bit of 9 feet or a little more trnsom to bulkhead.
Hope you get it figured. I see most Fountains are not a full 48"staggar with 18" drive spacing. This may be causing your layout problems.
Find a boat with short staggar and you may get it to fit.
Ken
The engine compartment was liklely custom but it was every bit of 9 feet or a little more trnsom to bulkhead.
Hope you get it figured. I see most Fountains are not a full 48"staggar with 18" drive spacing. This may be causing your layout problems.
Find a boat with short staggar and you may get it to fit.
Ken
__________________
47 Lightning SE
47 Lightning SE





