Airpax Switch boots. Help Please!!
08-16-2010 | 03:00 PM
#1
Thread Starter
Registered
Joined: Sep 2009
Posts: 38
Likes: 0
From: Lexington, KY
Airpax Switch boots. Help Please!!
Hello All,
Ok so I have a mystery here. I have a 1996 Fountain and my blower breaker switch went out. So after much searching I found a matched replacement off of ebay. Here is the strange part. The boot was ripped too and I cannot find a replacement anywhere. All of the ones I find look similar but the thread pitch is different. I have found many places who carry these but again they all use a different threads on theirs. Has anyone else run into this? Its an Airpax switch. Again, thanks in advance for your help.
Eric
Ok so I have a mystery here. I have a 1996 Fountain and my blower breaker switch went out. So after much searching I found a matched replacement off of ebay. Here is the strange part. The boot was ripped too and I cannot find a replacement anywhere. All of the ones I find look similar but the thread pitch is different. I have found many places who carry these but again they all use a different threads on theirs. Has anyone else run into this? Its an Airpax switch. Again, thanks in advance for your help.
Eric
08-18-2010 | 12:51 PM
#2
Thread Starter
Registered
Joined: Sep 2009
Posts: 38
Likes: 0
From: Lexington, KY
26 views and no answers!?!
Someone had to have run into this along the line. Still looking for some guidance. Thanks All.
Hello All,
Ok so I have a mystery here. I have a 1996 Fountain and my blower breaker switch went out. So after much searching I found a matched replacement off of ebay. Here is the strange part. The boot was ripped too and I cannot find a replacement anywhere. All of the ones I find look similar but the thread pitch is different. I have found many places who carry these but again they all use a different threads on theirs. Has anyone else run into this? Its an Airpax switch. Again, thanks in advance for your help.
Eric
Ok so I have a mystery here. I have a 1996 Fountain and my blower breaker switch went out. So after much searching I found a matched replacement off of ebay. Here is the strange part. The boot was ripped too and I cannot find a replacement anywhere. All of the ones I find look similar but the thread pitch is different. I have found many places who carry these but again they all use a different threads on theirs. Has anyone else run into this? Its an Airpax switch. Again, thanks in advance for your help.
Eric
08-18-2010 | 01:04 PM
#3
Beak botr
Joined: Dec 2003
Posts: 891
Likes: 0
From: Cape Coral
I added some toggle switches and ran into this same thread pitch and diameter problem. I finally purchased Carling switches from CP Performance and the boots for the switches together. Now they match and work, but I do not know if they are the same exact size as the dash switches on the Fountain. To me, they are close enough such that if I had one fail, I would substitute the Carling switch and boot.
