I can't post photos, so here goes.

I need the oil line, which runs from the block to the oil filter mount (upside down filter) on a 454 MPI/502 MPI. This line runs between the engine and the exhaust manifold and it is constructed of steel tubing (along the manifold) and rubber on the block side. Must be in usable condition.

Thanks.

Ken

Go to your local Autoparts store and just buy a standard premade "3/8" "brake line". Pull a HD wire through it, bend it anyshape you want, Pull the wire out, then just add the rubber hose.You can get the right fittings also.

I am looking for a stock part to use as a "mule" for a modification.

If nothing shows up, I just may have to go the auto parts route.

Ken

Ken, I dont have anything used, but I can get you a new one it it helps.. Depending on what you are trying to do I may be able to help you or have an idea that may help.. Feel free to give me a ring if I may be of service.. Jamie / Lakeside 570-639-2628

Thanks Jamie, but the project isn't worth the cost of a new part.

Ken

No worries.. If you dont mind me asking, what are you trying to do? Jamie

I may have what you are looking for. Give me a call 609 680 8800.

http://mercruiserparts.com/


http://www.mercruiserparts.com/Show_...ER+AND+ADAPTOR

Number 20 in this link? $45.01

http://www.mercruiserparts.com/Show_...er+and+Adaptor

That is the part, but the project isn't worth 45.00.

EWPE, I will give you a call.

Ken