HP500 cam???
09-08-2010 | 10:57 AM
#2
Registered
Joined: Dec 2007
Posts: 784
Likes: 0
From: Detroit River/ lake Erie
09-08-2010 | 11:29 AM
#3
Charter Member # 55
Joined: Oct 2000
Posts: 20,241
Likes: 2,490
From: Omaha/LOTO
I think this is it
http://www.cranecams.com/?show=brows...tType=camshaft
http://www.cranecams.com/?show=brows...tType=camshaft
The hp500 carb is a Crane 169611
http://www.cranecams.com/index.php?s...11&lvl=2&prt=5
The 500EFI is a Crane 169621
http://www.cranecams.com/index.php?s...21&lvl=2&prt=5
09-08-2010 | 06:53 PM
#4
Thread Starter
Registered
Joined: Aug 2004
Posts: 1,085
Likes: 22
From: Fort Worth, Texas
Thank you VERY much guys. I read somewhere...I think...possibly on Teague on Tech that the Crane 139731 cam was the same as the HP500. I am trying to get my marbles lined up...again...thank you.
09-09-2010 | 07:25 PM
#6
Charter Member # 55
Joined: Oct 2000
Posts: 20,241
Likes: 2,490
From: Omaha/LOTO
The 500HP carbed cam has a 110 lob sep and was a lot more prone to reversion.
09-09-2010 | 08:05 PM
#8
Registered
Joined: Dec 2006
Posts: 2,494
Likes: 1
From: Chesapeake Bay
09-09-2010 | 08:12 PM
#9
Registered
Joined: Dec 2007
Posts: 784
Likes: 0
From: Detroit River/ lake Erie
Call Bullet Racing cams AKA"UltraDyne" and talk to Tim goolsby 662-893-8022 he will dial you in with the right grind your looking for they can grind the 731 if that's what you want or you can tell him what you have and want and he will come up with a custom grind that will run better than the ones your looking at.
Last edited by Rockfish71; 09-09-2010 at 08:14 PM.
09-09-2010 | 08:20 PM
#10
Registered
Joined: Dec 2006
Posts: 2,494
Likes: 1
From: Chesapeake Bay
Call Bullet Racing cams AKA"UltraDyne" and talk to Tim goolsby 662-893-8022 he will dial you in with the right grind your looking for they can grind the 731 if that's what you want or you can tell him what you have and want and he will come up with a custom grind that will run better than the ones your looking at.
