Just got off the dyno with this one last night.. Stock 350 bottom end with about 200 hrs, 9:1 compression, RM builder cam, AFR 180 heads, Edelbrock RPM, 650hp carb, 89 octane. It ran super smooth and had good crisp throttle response. I thought it was a pretty cool little package and easy for anyone to duplicate.

Nice work , I absolutely love the afr heads and RMbuilders custom cams, it just makes it easy to achieve good numbers, Smitty

very nice upgrade, this would add 100+ hp a side for me...perfect winter project

Definitely, I think the best thing about Bob's cams is how they make the power, it's not just a big peak number there's power everywhere. The curves on a graph are beautiful and they idle great! Thanks Smitty.

So you went to carb setup from the efi?

What can you do for upgrades and keep the efi?

I can beat those numbers with a set of Vortec heads.

Don't you mean "peanut ports"!!!!!!!

Oh no, not again! Nice work on the 350! Those are some great numbers. I need to get my engine on the dyno and see exactly what it's making.

Was the crank, rods and pistons a cast pieces? Looking at the rpm, what cam was used and its rpm range?

Nice HP for a non stroker IMO.

Oh yeah. The smaller the better!

Nice work.