Weiand 177 Height
I've been trying to find this all afternoon, and I'm sure someone knows this off of the top of their head.
Can someone tell me the height difference between a 454 with an average intake on it (the 370/420 carb intake to be exact) vs a 177 blower? I'm looking for the number of inches that the blower will raise the top of the carb, and trying to figure out if a 177 will fit beneath the hatch of a 377 staggard Scarab, TRS setup. Thanks! |
I'm thinking about 8", but that depends on the intake you have now if you had a dart might be only 6"
|
Originally Posted by ezstriper
(Post 3236377)
I'm thinking about 8", but that depends on the intake you have now if you had a dart might be only 6"
I would tend to think "will it fit?" would be one of the most commonly asked Q's about a blower, but I can't find the info anywhere on Weiand or Holley's website (or Summitt or anywhere else for that matter...). |
|
An additional 6" of clearance and it should fit with no problem. Make sure you have that much clearance at the front and back of the flame arrestor.
|
CP - that's PERFECT. Thank you, that is exactly what I was looking for.
I think you're right Griff. I think the intake that is on there now is around 4" to 4.5" from the bottom of the valley to the top of the intake. It looks like adding the 177 adds about another 6' or so, perfect! |
All times are GMT -5. The time now is 12:30 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.