How hard do you normaly run your engine
10-28-2010 | 07:23 PM
#1
Thread Starter
Registered
Joined: Oct 2009
Posts: 333
Likes: 2
From: Fairless Hills Pa
How hard do you normaly run your engine
I was curious on what rpm evryone runs there boats most time. Do you run 3000, 3200,3500,3800,4000 for cruise rpms.
If you like, list a general idea of your boat and how you run it.
I have a
30 cig mystique
496 ho
cruise 3500 @50 mph normally
fast cruise 3800 to 4000.
If you like, list a general idea of your boat and how you run it.
I have a
30 cig mystique
496 ho
cruise 3500 @50 mph normally
fast cruise 3800 to 4000.
10-28-2010 | 08:49 PM
#10
Registered
Joined: Nov 2003
Posts: 2,296
Likes: 3
From: Lake Travis ,Texas
27ft Carrera, 509" around 525-550hp ,
Bravo drive with nosecone, 26p Powertech,
fully loaded weight around 6000lbs
cruise 4000rpm 45-47 mph
WOT 5200rpm 69-70mph
due to high x dimension ,
single engine,no tabs,
25deg V and heavy boat it wont even stay on plane below 3400rpm..
for me its idle or 35mph..
Hopefully I can fix that with a 5 blader.
Bravo drive with nosecone, 26p Powertech,
fully loaded weight around 6000lbs
cruise 4000rpm 45-47 mph
WOT 5200rpm 69-70mph
due to high x dimension ,
single engine,no tabs,
25deg V and heavy boat it wont even stay on plane below 3400rpm..
for me its idle or 35mph..
Hopefully I can fix that with a 5 blader.
Last edited by HTRDLNCN; 10-28-2010 at 08:52 PM.
