|
shaft rockers
are the shaft rockers jesel/t-d worth the money compared to comp pro magnums rollers
|
In my opinion, a resounding, yes. If I were to build a new set of motors for any application, I would use shaft rockers on any BBC.
The lash stays constant and the whole valve train is much more stable. I used T&D on a pair of 572" BBC with PSI blowers for over 10 years w/o any failure. They are worth the extra expense, in my opinion. |
Originally Posted by RMPRam
(Post 3289493)
In my opinion, a resounding, yes. If I were to build a new set of motors for any application, I would use shaft rockers on any BBC.
The lash stays constant and the whole valve train is much more stable. I used T&D on a pair of 572" BBC with PSI blowers for over 10 years w/o any failure. They are worth the extra expense, in my opinion. |
Originally Posted by itbs
(Post 3289464)
are the shaft rockers jesel/t-d worth the money compared to comp pro magnums rollers
|
Yes.
|
Shaft rockers and GOOD push rod's are well worth the money on a BBC.
|
yes
Shaft rockers all the way. Raced with them for years never a failure.
|
I run T&D shaft rockers. In my opinion, they are better than Jesels. They are worth the $$.
|
Crower Stainless.
|
I have the Jesel shaft rockers in mine. Seem to handle 6000rpm + just fine.
|
| All times are GMT -5. The time now is 07:09 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.