shaft rockers
01-05-2011 | 03:21 PM
#2
Platinum Member
Joined: Oct 2000
Posts: 1,056
Likes: 29
From: Santa Barbara CA. USA
In my opinion, a resounding, yes. If I were to build a new set of motors for any application, I would use shaft rockers on any BBC.
The lash stays constant and the whole valve train is much more stable. I used T&D on a pair of 572" BBC with PSI blowers for over 10 years w/o any failure. They are worth the extra expense, in my opinion.
The lash stays constant and the whole valve train is much more stable. I used T&D on a pair of 572" BBC with PSI blowers for over 10 years w/o any failure. They are worth the extra expense, in my opinion.
01-05-2011 | 04:45 PM
#3
Registered
Joined: Apr 2002
Posts: 1,237
Likes: 4
From: Lake of the ozarks
In my opinion, a resounding, yes. If I were to build a new set of motors for any application, I would use shaft rockers on any BBC.
The lash stays constant and the whole valve train is much more stable. I used T&D on a pair of 572" BBC with PSI blowers for over 10 years w/o any failure. They are worth the extra expense, in my opinion.
The lash stays constant and the whole valve train is much more stable. I used T&D on a pair of 572" BBC with PSI blowers for over 10 years w/o any failure. They are worth the extra expense, in my opinion.
