Offshoreonly.com - 502 casting

Page 3 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - 502 casting (https://www.offshoreonly.com/forums/general-q/247682-502-casting.html)

toolsinbox

02-19-2011 04:10 PM

ok I have another short block to check out. here are the numbers. 10237300 I looked it up and and it shows a gen 6- 4 bolt main. I will send fixx a pic as soon as I get it.

Eliminator28

02-19-2011 09:13 PM

Quote:

Originally Posted by toolsinbox (Post 3330972)

ok I have another short block to check out. here are the numbers. 10237300 I looked it up and and it shows a gen 6- 4 bolt main. I will send fixx a pic as soon as I get it.

That's a 502 block, gen VI.

toolsinbox

02-20-2011 09:12 PM

I sent pic to mrfixx
engine says crusader in crome valve covers hang on I will upload to photobucket so all can see. here is the link let me know what you think

http://i874.photobucket.com/albums/a.../502engine.jpg

toolsinbox

03-01-2011 06:37 PM

Any reason to stay away from a tall deck 454? it has a single piece rear main seal. What are the pros and cons please. I am interested if there are any limitations to this type of block.

casting number. 10114182

FIXX	03-01-2011 07:29 PM

Fixx

Quote:

Originally Posted by toolsinbox (Post 3339339)

Seller says its a 90s 454 but could be a tall deck.
Thanks

Ok found the info.

10114182

make sure its not reverse rotation..Crusader engine

FIXX	03-01-2011 07:32 PM

Fixx

Quote:

Originally Posted by toolsinbox (Post 3339339)

Seller says its a 90s 454 but could be a tall deck.
Thanks

Ok found the info.

10114182

make sure its not reverse rotation..Crusader engine

10114182 gen V 454...standard.

All times are GMT -5. The time now is 01:35 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page