tall deck 454
#1
Registered
Thread Starter
Join Date: Dec 2009
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
tall deck 454
What is the scoop on tall deck 454s
casting number 10114182 seller says one piece rear main seal
I was told there are no gm 454 tall decks
. what would be that max potential of this block from the intake down? Not taking into account what fuel delivery system used. I
am aware that the intake needs to be for the spread and or spacers used
If gm didnt make this then who did? Any and all info on this is greatly appreciated. I have a shot at this one in my home town. It's .20 over with all the parts. cheap cheap. like 400 bucks.
casting number 10114182 seller says one piece rear main seal
I was told there are no gm 454 tall decks
. what would be that max potential of this block from the intake down? Not taking into account what fuel delivery system used. I
am aware that the intake needs to be for the spread and or spacers used
If gm didnt make this then who did? Any and all info on this is greatly appreciated. I have a shot at this one in my home town. It's .20 over with all the parts. cheap cheap. like 400 bucks.
#2
Registered
Join Date: Feb 2002
Location: Lake Michigan
Posts: 6,627
Likes: 0
Received 0 Likes
on
0 Posts
Last edited by Back4More; 03-01-2011 at 09:19 PM.
#4
Registered
Join Date: Feb 2002
Location: Lake Michigan
Posts: 6,627
Likes: 0
Received 0 Likes
on
0 Posts
Or even this....Looks like a short deck in the pics.
http://cgi.ebay.com/ebaymotors/Big-B...ts_Accessories
http://cgi.ebay.com/ebaymotors/Big-B...ts_Accessories
Last edited by Back4More; 03-01-2011 at 09:47 PM.
#6
Registered
Thread Starter
Join Date: Dec 2009
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
owner says its from a 90s truck and was told it could be a tall deck.
I found the only way to get a bare 502 around where I live is to order one new. I thought this may be the next best thing as I can bore it and stroke it to hop up the displacement. Only thing is the generation V thing.
What is your take?
I found the only way to get a bare 502 around where I live is to order one new. I thought this may be the next best thing as I can bore it and stroke it to hop up the displacement. Only thing is the generation V thing.
What is your take?
#8
Registered
Thread Starter
Join Date: Dec 2009
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
here is a pic of the front of the block.
Tall deck or not ?
http://i874.photobucket.com/albums/a...x/HPIM0203.jpg
Tall deck or not ?
http://i874.photobucket.com/albums/a...x/HPIM0203.jpg