![]() |
Big M Dart block..is it ok for marine use??
Does anyone know if a Big M Dart Block would be ok to use for a marine application?
|
As long as you machine with the proper clearances, I wouldn't see why not.
|
Might be one of the best for the application.
|
Originally Posted by GPM
(Post 3352905)
Might be one of the best for the application.
|
I was told by a few people that Marine block and street blocks were different. That a street block does not have as much water porting as a marine block. I can get a decent deal on a Big M Daert block rebuild. Cost me about 4800.00 for whole rebuild. Ive got a cracked block with 150 hours on engine and mechanic would rebuild mine with a Dart block. Its a 502 Mag. Does that sound like a decent price?
|
only problem is that a 502 mag is a gen 5/6 block and the dart is a gen 4, so your rotating assembly will not work in the dart block. At least your crank wont work.
|
Originally Posted by tsayvan
(Post 3352993)
I was told by a few people that Marine block and street blocks were different. That a street block does not have as much water porting as a marine block. I can get a decent deal on a Big M Daert block rebuild. Cost me about 4800.00 for whole rebuild. Ive got a cracked block with 150 hours on engine and mechanic would rebuild mine with a Dart block. Its a 502 Mag. Does that sound like a decent price?
Big M blocks are one of the best for big block builds. I have no knowledge of a difference between street and marine, but I guess there could be. Beat me to it..... |
If you are just planning on rebuilding back to 502 mag specs, then the dart block is kind of overkill anyway.
|
well, maybe you can see it ..but in the classifieds here are plenty 502.ss for a few dollars more , this one is a complete engine ..beefed up and ready to drop in !!!!!
http://www.offshoreonly.com/classifi...o38059-en.html |
it would be a great upgrade over std block
|
Just buy new it's the best deal out there and it all GM"S best performance parts inside. and sell all the parts you have you will spend less and have more in the end
http://www.1800runsnew.com/newbase-details-NLM.html#502 |
Yea that is full price. machine work, gaskets, new cam, new lifters etc. I think its a good deal. I just dont know much about 502's, I usually own outboards and this is a big step for me.
|
The Dart block is a great block. Go with it. May as well upgrade the horse power at the same time. Take advanage of the Dart block.
|
| All times are GMT -5. The time now is 09:17 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.