Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Eickert Tail Extention (https://www.offshoreonly.com/forums/general-q/250066-eickert-tail-extention.html)

tnc110 04-01-2012 07:17 PM
Originally Posted by blue thunder (Post 3653626)
Yes, the tubing has threads in it. If your tips are offset from your tails I'm not sure you could ever get the inserts to slide into the tailpipe inner tube. It needs to be a pretty straight shot.
Ive got a tig welder...I was thinking of a few angle cuts and weld the tubing back together and I could make it line up. Was concerned about the rubber exhaust hose touching the aluminum tubing at the bends.

Do you have any butterfly type valves in there anywhere to keep water from going up the exhaust?

How does she sound?

blue thunder 04-02-2012 06:02 AM
I use clamp on rubber flappers to keep backwash out, they are not on in the pics. It sounds like dry exhaust, loud and crackly.


All times are GMT -5. The time now is 06:57 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.