nose cone epoxy
#1
Registered
Thread Starter
Join Date: Jul 2002
Location: pa
Posts: 2,233
Likes: 0
Received 0 Likes
on
0 Posts
nose cone epoxy
getting ready to put 2 nose cones on my bravo 1 lowers what is a good epoxy that holds up and any info would be appreciated.
Last edited by rssteiny; 04-05-2011 at 06:37 PM.
#4
Registered
#5
Registered
Join Date: Jul 2009
Location: Grosse Pointe Farms, MI
Posts: 1,570
Likes: 0
Received 2 Likes
on
2 Posts
Has anyone used Marine Trex, and if so, do you need metal filler with it?
My nosecones are installed and on tight, but they're not blended so well. I would like to smooth everything out better, and I was considering using MT. Thoughts or other options are appreciated.
My nosecones are installed and on tight, but they're not blended so well. I would like to smooth everything out better, and I was considering using MT. Thoughts or other options are appreciated.
#7
Registered
iTrader: (2)
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
Fixx
all metal works excellent on the pitting,,nice part is you can finish sand it with 320 and paint over it with just a few coats of zinc primer then paint it shortly after...cant tell its been repaired.
#8
Registered
Thread Starter
Join Date: Jul 2002
Location: pa
Posts: 2,233
Likes: 0
Received 0 Likes
on
0 Posts
#9
Registered
Thread Starter
Join Date: Jul 2002
Location: pa
Posts: 2,233
Likes: 0
Received 0 Likes
on
0 Posts
How well does the low water pick up slots line up do you need to do some modifing on that as well and where do i get the epoxy.
Also about how long does it take per drive to do this.
Also about how long does it take per drive to do this.
#10
Registered
Join Date: Nov 2001
Location: Pennsylvania
Posts: 3,385
Likes: 0
Received 0 Likes
on
0 Posts
Here's where I got mine to reinstall my bobs nosecone. Works great and packaged as enough for one nosecone. It was around $25.
http://bobsmachine.com/
http://bobsmachine.com/