We can hammer out the fine details but, since this is a performance boating website the only thing set in stone is WOT for at least 20mins on 89 octane, just like in a boat. If you can't do that then go ask for a shootout on an automotive foum.. Thanks, Alex THE ONLY THING SET IN STONE IS THE WOT FOR 20 MINS ON 89 OCTANE. production 454 block and heads, any thing else goes, dyno test at Mike Lewis and if his water is not sufficent then Westec. 10 grand winner takes all, money held by Mike Lewis 30 days prior to the test, HP dyno pulls first, then 20 mins @ 6500 RPM full load, water changed after each test, you go first endurance expert, thats the stipulations, you turned this into a endurance test, you cant have every thing your way. After all it is a boat forum, Lets go.......

I guess were going to have a edurance shoot out!

you said that already , is that the best you can do

VP,

Can you post something besides a Cut/Paste over and over.

You have the challenge. Be in Florida, and show all the Major Industry guys how great your stuff is.

Great. Here is the times and place

http://www.offshoreonly.com/forums/3509787-post72.html

hhhmmmmmmm you know i may be there that weekend for a tft run :evilb:

The tests going to be in Ca, REMEMEMBER: THE ONLY THING SET IN STONE IS THE 20 MINUTES @ WOT THROTTLE. Haxbys words.

Sounds to me someone doesn't want their ass kicking to be the joke of PRI this year. Missed opportunity is what I call it. Its ashame.

Its a cheap flight for me. Sounds good.

We can hammer out the fine details but, since this is a performance boating website the only thing set in stone is WOT for at least 20mins on 89 octane, just like in a boat. If you can't do that then go ask for a shootout on an automotive foum.. Thanks, Alex THE ONLY THING SET IN STONE IS THE WOT FOR 20 MINS ON 89 OCTANE. production 454 block and heads, any thing else goes, dyno test at Mike Lewis and if his water is not sufficent then Westec. 10 grand winner takes all, money held by Mike Lewis 30 days prior to the test, HP dyno pulls first, then 20 mins @ 6500 RPM full load, water changed after each test, you go first endurance expert, thats the stipulations, you turned this into a endurance test, you cant have every thing your way. After all it is a boat forum, Lets go.......