nordic95

Anyone know where to look for cable bellows that seal the outboard cables to the transom????

Thanks Anthony

rchevelle71

iTrader: (1)

Do a search for rigging tube, what motor, some have specific fittings at the cowl, some are generic, in fact I just rigged one on a budget using shop vac hose from home depot.

nordic95

This is on a small cougar cub for my kids so it needs to be about 2" round at the mounting point and only seals a cable or two. They are hard to find...

Anthony

rchevelle71

iTrader: (1)

Are you looking for the bezel where it goes into the hull, or the tubing, or both? How much do you need?

nordic95

Im looking for the ring and the boot, i need two complete units. The ones im seeing are much larger like 5.5" and I found 2" on ebay but with no ring. And I cant locate the ring or a set any where yet.

DynojetResearch

If you're looking to go around cables, maybe these would work? http://www.rexmar.com/page107.html

3" is the smallest generic ones I've seen: http://www.westmarine.com/webapp/wcs...classNum=10413 or http://www.westmarine.com/webapp/wcs...classNum=10473

northernoffshore

http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT