Neutral safety switch cant find
08-10-2011, 08:23 AM
#1
Registered
Thread Starter
Join Date: Jun 2011
Location: Thousand Islands area
Posts: 2,349
Likes: 0
Received 4 Likes
on
3 Posts
Neutral safety switch cant find
This Spring I had an isse with the slave solenoid replaced it boat worked fine. Now its doing the same thing again. I can not imagine the solenoid is bad already, if it is what could have caused it to go so quick.
Either way I have on being overnighted and I havent been out to really troubleshoot due to the rain. But there is a big weekend and I cant miss out. Im going to replace the solenoid or at least test the one in there now. If its not that Im thinking its the neutral safety switch. I know its the yellow wire I think on the slave solenoid but wanted to confirm and how do you by pass it?
Either way I have on being overnighted and I havent been out to really troubleshoot due to the rain. But there is a big weekend and I cant miss out. Im going to replace the solenoid or at least test the one in there now. If its not that Im thinking its the neutral safety switch. I know its the yellow wire I think on the slave solenoid but wanted to confirm and how do you by pass it?
Charter Member
