Need help with merc silent choice
I've got the merc silent choice setup on my boat and it's leaking water around the bushing and seal where the flapper rod comes thru the side of the pipe, I've got new seals and bushings but I'm not sure how to go about replacing them. Can I do it ithe boat or do I have to take the diverter off and lay it on a bench? Trying to get on the water tomorrow and really don't want leaky exhaust if you know what I mean. Any help or ideas would be great.
|
all the ones I've ever seen leak....just some more than others..
|
Originally Posted by ezstriper
(Post 3486153)
all the ones I've ever seen leak....just some more than others..
|
To get the shaft out where the seal is leaking will require removal of two bolts/screws inside diverter. You will have to remove to access. The seals are available through carquest PN 471442.
|
Originally Posted by dcb
(Post 3486387)
To get the shaft out where the seal is leaking will require removal of two bolts/screws inside diverter. You will have to remove to access. The seals are available through carquest PN 471442.
|
All times are GMT -5. The time now is 12:26 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.