Engine Rebuilt Nightmare
#72
Registered
Join Date: Oct 2006
Location: Michigan
Posts: 1,449
Likes: 0
Received 0 Likes
on
0 Posts
Just read th entire thread, sorry to hear about your luck. What are your next plans?
I on the other hand have been having great luck my project, the numbers are not quite there yet but no real mechanical issues. I still want to try moving my prop shaft height around and seeing what the difference is between an IMCO shortened lower and stock lower. Once that is figured out then I will try a few different props before labbing.
I on the other hand have been having great luck my project, the numbers are not quite there yet but no real mechanical issues. I still want to try moving my prop shaft height around and seeing what the difference is between an IMCO shortened lower and stock lower. Once that is figured out then I will try a few different props before labbing.