Originally Posted by SB (Post 3514891)

Anything to avoid direct questions.

Which is it - manufacturers rep or employee ?

Originally Posted by Zone 5 (Post 3514877)

So now are you going to answer his question?

Originally Posted by cstraub (Post 3514897)

I make and supply parts. My customers range from other manufacturers, engine builders, and end users.

Originally Posted by HaxbySpeed (Post 3514906)

What parts specifically do you make?

Originally Posted by cstraub (Post 3514912)

Locks, retainers, guideplates, roller cam buttons, aluminum cam buttons, degree bushings, lifter valley vents, and a few other items.

Originally Posted by cstraub (Post 3514900)

Why so many screen names Scott?

Originally Posted by SB (Post 1711859)

Hey guys - My ears where burning and I was directed to this thread.

I'll try to help as much as possible.

- Scott aka CFM

Originally Posted by SB (Post 3488296)

Now if you aren't Tdaddy shoot me dead. LOL.

You already hang out there and you're pretty much on top.

"It's a small block nation" - Tdaddy

- CFM (SB here)

Originally Posted by SB (Post 3485015)

Smitty, it's CFM, - the distributors (Merc vs GM) are identical.
Screens, etc,etc.

Merc just charges a little more. LOL.

I like the Accel Cap/Rotor or any other with brass terminals. The GM/Merc has aluminum terminals.

BTW: the modules do have timing curves. 22 degrees all in by 2800rpm. Pretty good one for performance carb motors. Yes, I said carb. Have used them that way too. When used with EFI, the ECU will have it's own timing data of course.

Originally Posted by SB (Post 3514963)

You know me as SB...lying again!

I'm CFM everywhere else except here. I make it known in many threads. Look at my join date.

Weird thing is, back at that time of my join date we used to converse (phone, e-mail, here, other forums) on a friendly level and you new me here as SB.

Trying to muddy the water again..........answer the question.






You knew me as SB back 'in the days ' as we talked on the phone about this stuff also.

See here:
http://www.offshoreonly.com/forums/g...ont-laugh.html

http://www.offshoreonly.com/forums/g...ml#post1829412

http://www.offshoreonly.com/forums/g...take-carb.html

http://www.offshoreonly.com/forums/g...-build-up.html

on and on and on.

Want more when referencing me as CFM ? Even though you know me as SB (just here) and CFM everywhere else ?



Want more ?
Or you going to keep lying that you don't know me as SB and I'm trying to hide who I am ?

Now...again.........answer the question.