Offshoreonly.com - Polishing Exhaust Tips

Page 3 of 4

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Polishing Exhaust Tips (https://www.offshoreonly.com/forums/general-q/263610-polishing-exhaust-tips.html)

MC-BOYS

10-07-2011 07:42 PM

I use Mequiars metal polish and a little elbow grease and turns out great!!

JasonSmith

10-07-2011 07:45 PM

I used a guy named Paco. I picked him up at Home Depot for $25 and he washed, waxed and detailed my entire boat & truck.

tcwcar

10-07-2011 07:50 PM

well it depends if they got scraches or not...... i have restored alot of ss for the cars i build, and just I restored the ss on my boat... if no heavy scraches i went to harbor freight got the elec die grinder, the Demial is great but not big enuff for me, harbor freigt also has pads for drill/diegrinder. use the white polish/rues with the kit...it will come out like a mirror....

drozz30

10-08-2011 06:18 AM

Quote:

Originally Posted by JasonSmith (Post 3522388)

I used a guy named Paco. I picked him up at Home Depot for $25 and he washed, waxed and detailed my entire boat & truck.

lol nice!!!

Rookie

10-08-2011 08:57 PM

2 Attachment(s)

Quote:

Originally Posted by tcwcar (Post 3522398)

Exactly!!
A dremel will not do what you need. If you need to polish you need the right equipment. I just did this today so you can see. First you want to POLISH, not clean with a bathroom cleaner. Bathroom cleaners are GREAT after you polish to maintain them and remove the hard water stains. Before you polish you can use muriatic acid to clean the stainless.

These looked identical earlier.

coolmedown

10-08-2011 09:06 PM

Rookie==Very nice on that shine. Hope to finish mine today. Had the boat winterized today, and changed the oil. SAD DAY..

Z06	11-08-2011 10:49 PM

Quote:

Originally Posted by 07DominatorSS (Post 3521703)

You want something easy? Honest to god, use the BioKleen Hull Kleener. There is literally no effort. Spray on, and soft brush off and done.

Agreed! I use the same, BioKleen Hull Kleener, just spray and rinse and they always look like new.

endeavor1

11-08-2011 11:13 PM

Quote:

Originally Posted by mike tkach (Post 3522178)

i also use the works toilet boul cleaner.pour it on,brush it,then ronse it off

Yeppo!! Go to Dollar General and its a buck :drink: Stuff works great.

ThisIsLivin

11-10-2011 08:51 AM

I use Bon Ami cleanser, Mitch at MitcherT got me hooked on this stuff. I started using on my vinyl rub rail. I tried it on my tips because they looked bad, cleaned them right up, look like new.

bsboss

11-10-2011 12:50 PM

Quote:

Originally Posted by JasonSmith (Post 3522388)

I used a guy named Paco. I picked him up at Home Depot for $25 and he washed, waxed and detailed my entire boat & truck.

Wonder if Paco will travel???

All times are GMT -5. The time now is 11:32 PM.

Page 3 of 4

Show 40 post(s) from this thread on one page