Aeromotive
#1
Registered
Thread Starter
Join Date: Nov 2000
Location: cave creek Arizona USA
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Aeromotive
I just recently lost a motor. It looks like The aeromotive fuel pump
Failed. Pulled the fuel injectors to have them tested. the guy who was going to test the injectors called me and said "most of the injectors are plugged with some kind of rust looking plastic stuff".
I then took the injectors to the person who installed the fuel pump and at that time installed a whipple SC. I showed him the stuff that was pulled out of the injectors. with out any hesitation he said "this looks like epoxy from the fuel pump. took the fuel pump apart and sure enough that's were the stuff is coming from.
Has anyone else had this problem.
Thanks,
jdelo
Failed. Pulled the fuel injectors to have them tested. the guy who was going to test the injectors called me and said "most of the injectors are plugged with some kind of rust looking plastic stuff".
I then took the injectors to the person who installed the fuel pump and at that time installed a whipple SC. I showed him the stuff that was pulled out of the injectors. with out any hesitation he said "this looks like epoxy from the fuel pump. took the fuel pump apart and sure enough that's were the stuff is coming from.
Has anyone else had this problem.
Thanks,
jdelo
#2
Charter Member
Charter Member
Join Date: Oct 2000
Location: Lake Orion, MI. USA
Posts: 1,560
Likes: 0
Received 0 Likes
on
0 Posts
I have the 1000 HP version that pumps 500Lbs / Hr About 6 hours on the new engines and no problems (yet) Which pump were you running?
__________________
Ray
Ray
Thread
Thread Starter
Forum
Replies
Last Post
Pure Energy
General Boating Discussion
1
09-23-2003 06:09 PM