Winterize issue..
11-09-2011, 07:10 AM
#21
Registered
Join Date: Jun 2011
Location: Cashiers NC
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
i use a bilage pump..has not failed me in over 20 yrs 
i also turn up the idle to 1200 rpms.while its running at the end of the i will for the engine..
http://www.youtube.com/watch?v=LzDob8um5Xc
i also turn up the idle to 1200 rpms.while its running at the end of the i will for the engine..
http://www.youtube.com/watch?v=LzDob8um5Xc
11-17-2011, 11:21 PM
#22
Registered
Thread Starter
Just to finish this thread,
I did get the seawater pump installed, cleaned out the hoses and ran antifreeze thru everything.
All is well, thanx for the input.
I did get the seawater pump installed, cleaned out the hoses and ran antifreeze thru everything.
All is well, thanx for the input.
11-18-2011, 03:57 PM
#23
Registered
You might want to get a spare impeller to keep on hand. I keep a spare impeller as well as a complete sea pump on the boat. You will need it sooner or later. Like mentioned above, they will go out without notice and if your prepared it's only 30 minutes to an hour and your back in business. Just saved my buddy as I had a spare. Now he too carries extra's
11-20-2011, 09:07 AM
#24
Registered
Thread Starter
You might want to get a spare impeller to keep on hand. I keep a spare impeller as well as a complete sea pump on the boat. You will need it sooner or later. Like mentioned above, they will go out without notice and if your prepared it's only 30 minutes to an hour and your back in business. Just saved my buddy as I had a spare. Now he too carries extra's
