|
Originally Posted by yschmidt
(Post 4124558)
What's missing is an after picture.
[ATTACH=CONFIG]523588[/ATTACH][ATTACH=CONFIG]523589[/ATTACH] |
Originally Posted by brian41
(Post 4123594)
Starboard engine hit the 800 mark on its 3rd pull and we are calling it done......2nd pull was a biooootch.
I know from talking with Madara; you used a hydraulic roller, had Tony, put his touch on porting the heads. I used a solid roller from Madara, that Bob, explained was pretty close in comparison. Bob, could explain the difference better than I. I just received my new laptop with Windows 7, since you can't just buy one over the counter. So I have been out of action and not enough time anyways for the social forum. |
Originally Posted by tbanzer
(Post 4112719)
Any examples of a blow through system using a centrifugal supercharger. Im doing my home work on a 540 vortech supercharger project im going to build this year. My current 502 mag its starting as doesn't appear to support the air or fuel delivery needed, so I was leaning towards a blow through carb in a box for induction until I stumbled on this post.
I"ve got twin 540s with Vortech V4 Race versions running electromotive Engine control for the MPFI (Tec3). Its pretty straight forward to look at all engine parameters with their free software and update almost anything. http://www.electromotive-inc.com/ |
Can the Holley system run on a Mac computer? Or does it need to be windows
|
Originally Posted by MER Performance
(Post 4132766)
Brian, Nice job! How hard will it be for you to sell another carburetor after using Holley's EFI?
I know from talking with Madara; you used a hydraulic roller, had Tony, put his touch on porting the heads. I used a solid roller from Madara, that Bob, explained was pretty close in comparison. Bob, could explain the difference better than I. I just received my new laptop with Windows 7, since you can't just buy one over the counter. So I have been out of action and not enough time anyways for the social forum. Sorry I missed this post. Sell any more carbs?.....not if I can help it. I am currently specing out 2 builds that will be going from carb to EFI and a MEFI 3 Whipple project switch to Holley EFI. Am I sold...... YES!!!! |
Originally Posted by hadleycat
(Post 4153887)
Can the Holley system run on a Mac computer? Or does it need to be windows
|
Originally Posted by brian41
(Post 4153962)
I run Mac computers and had to buy a windows to run the Holley system.
|
Originally Posted by hadleycat
(Post 4153969)
Thanks for the reply.
|
Originally Posted by MER Performance
(Post 4154067)
Windows 7. Windows 8 will not work.
|
Originally Posted by hadleycat
(Post 4154117)
Would you know if Windows XP will work?
|
| All times are GMT -5. The time now is 01:12 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.