Cold air intake
I have extremely tight issue between my flame arrestor and the back of my seat I was wondering if I could make a sealed cover over the carb and duct 2 3" tubes to it. Would this be considered a flame arrestor or am I over thinking this I can only fit a stock 330 arrestor on and the seat is blocking 1/4 of it. The motor should be between 430 and 470hp.
|
got a pic?
|
Originally Posted by mr3dman
(Post 3606041)
got a pic?
|
Originally Posted by brivander
(Post 3606058)
Agreed -- the flame arrestor and the BACK of your seat? That doesn't make sense to me in my head, need a pic.
|
Originally Posted by aafed
(Post 3606095)
Its a formula 223ss the sundeck and seat go up as one right where the back of the seat meets the bottom of the seat it right over the front float bowl I will try to climb in their and snap a shot I have it mocked up as we speak theirs really no other option to fix the problem
What changed that it won't fit now? |
Quick Search and I see -- you have this style seating I'd bet.
http://www.yachtworld.com/core/listi...oat_id=2403823 |
Originally Posted by brivander
(Post 3606104)
Quick Search and I see -- you have this style seating I'd bet.
http://www.yachtworld.com/core/listi...oat_id=2403823 http://www.youtube.com/watch?v=UCN_1zh87vc |
Originally Posted by aafed
(Post 3606154)
I would have to email them its not letting me post the pic for some reason. I found a video of the exact same boat you can see what I am talking about
http://www.youtube.com/watch?v=UCN_1zh87vc |
All times are GMT -5. The time now is 11:54 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.