dui distributors
#1
Platinum Member

Thread Starter
iTrader: (5)
Join Date: May 2001
Location: NO WHERE
Posts: 3,358
Likes: 0
Received 0 Likes
on
0 Posts

does anyone run these they seem to be the way to go,im building a set of 540s talldeck and was thinking of usuing these any pros or cons???
#2
Platinum Member


All so the come set up nice from dui , custom tuned for your boats power and weight, I ran the clear dis caps, which are great as you can see what going on inside, great to see rotor spin, and see condition of contacts, and water....
The wire they make are the best quality i have ever seen, all numbered, super thick wrapped insolated.
#8

DUI has a rev module/limiter that installs inside the distributor; but, when I ordered mine they were out them and on back order so they sent me an external box, and three different rpm chips. I ordered the whole set for my 509 which included the distributor, curved to my motor specs, live wires, and rev box with chips. Best decision I've made and so far. Its been a great product!!
Here's the link to the distributor if you scroll down to the bottom you'll see the dyna module rev limiter.
http://www.performancedistributors.com/marinedui.htm
Here's the link to the distributor if you scroll down to the bottom you'll see the dyna module rev limiter.
http://www.performancedistributors.com/marinedui.htm
#9
Platinum Member


i didnt run a rev limiter on mine with the dui. my hands always on the sticks.
whats nice, is if you every have a problem with a dui any part can be bought at autozone to get you back on the water till you get a replacment part from dui. msd's fail so much, all my buddies carry extra pickups, coils, and boxes....
whats nice, is if you every have a problem with a dui any part can be bought at autozone to get you back on the water till you get a replacment part from dui. msd's fail so much, all my buddies carry extra pickups, coils, and boxes....