Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Jet help (https://www.offshoreonly.com/forums/general-q/272503-jet-help.html)

GTOFFSHORE 03-15-2012 09:43 PM
Originally Posted by plumb crazy (Post 3642146)
When my motor was stock that's about the same combo I ran with my 850 but now I turn 6000 rpm and I go white to black with no in between. The plugs stay white till I jet so high the motor falls on it's face.
What do you mean white to black? The porcelain does not show jetting per se The base ring does that.

plumb crazy 03-15-2012 09:52 PM
White looking like a new out of the box plug black as in jet black.

Griff 03-16-2012 01:28 AM
Originally Posted by plumb crazy (Post 3642146)
When my motor was stock that's about the same combo I ran with my 850 but now I turn 6000 rpm and I go white to black with no in between. The plugs stay white till I jet so high the motor falls on it's face.
The flow rate the HP series carbs is way over rated. The 950 HP flows about the same as an 850cfm.

What does the base circle of the plugs look like?????


All times are GMT -5. The time now is 08:46 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.