Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   cam pro's needed (https://www.offshoreonly.com/forums/general-q/272512-cam-pros-needed.html)

HaxbySpeed 03-19-2012 08:33 PM
Originally Posted by zeke (Post 3644359)
thats what ill do. thanks guys. theres not to many marine experts up where i am unless you run stock stuff.
any ideas what kinda HP #'s i should roughly have with a 496 and 5-7psi pro charger?
If you keep your compression between 8.75:1 and 9:1, with 7 lbs and a cam from Bob you'll be around 700-725hp.

zeke 03-19-2012 09:04 PM
maybe change of plans
 
well i was all up for stroking my 454 and adding my procharger to it. but by the time i machine, buy the rotating asembly etc...
maybe im better off going this route:
http://www.competitionproducts.com/T...o/CPXSB540090/


All times are GMT -5. The time now is 11:42 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.