Genorator exhausts tip
04-09-2012 | 03:26 PM
#1
Thread Starter
Registered
Joined: May 2006
Posts: 1,628
Likes: 2
From: Huntsville, AL
Genorator exhausts tip
So got all my new slash cut tips on and boat sounds way better. BUT my genny exhaust is on theback too (little 1.5-2 incher with its own rubber flapper)
It is now my personal prodject to have a mini slash cut tip with internal flapper made for it to match haha.
anyone done this? or know of a place I can copy/buy?
my thinking is staintless steal exhaust tip from car shop the right diameter... find some stainless to make the flange, and wled it up, and weld inside a metal grate like hardin marine, so i can mount a peice of rubber inside. and BAM gennerator slash cut polished tip. haha.
It is now my personal prodject to have a mini slash cut tip with internal flapper made for it to match haha.
anyone done this? or know of a place I can copy/buy?
my thinking is staintless steal exhaust tip from car shop the right diameter... find some stainless to make the flange, and wled it up, and weld inside a metal grate like hardin marine, so i can mount a peice of rubber inside. and BAM gennerator slash cut polished tip. haha.
Last edited by mittens; 04-09-2012 at 03:37 PM.
04-09-2012 | 06:06 PM
#2
Registered
Joined: Aug 2005
Posts: 6,306
Likes: 1
From: Between A Womans Leggs in IL
fixx
So got all my new slash cut tips on and boat sounds way better. BUT my genny exhaust is on theback too (little 1.5-2 incher with its own rubber flapper)
It is now my personal prodject to have a mini slash cut tip with internal flapper made for it to match haha.
anyone done this? or know of a place I can copy/buy?
my thinking is staintless steal exhaust tip from car shop the right diameter... find some stainless to make the flange, and wled it up, and weld inside a metal grate like hardin marine, so i can mount a peice of rubber inside. and BAM gennerator slash cut polished tip. haha.
It is now my personal prodject to have a mini slash cut tip with internal flapper made for it to match haha.
anyone done this? or know of a place I can copy/buy?
my thinking is staintless steal exhaust tip from car shop the right diameter... find some stainless to make the flange, and wled it up, and weld inside a metal grate like hardin marine, so i can mount a peice of rubber inside. and BAM gennerator slash cut polished tip. haha.
