650HP Small Block!
In this months issue of Hot Rod magazine they show a 357ci small block that'll rev to 8k rpm. Max hp (652.3) is at 7K and max torque (507.4) is at 6100 rpm.
All built with used NASCAR parts. Muscle Motorsports is a dealer of used Winston Cup parts and sells to the general public. They are currently starting to sell complete engines set up for hot street use. All components are as close to current race technology as you can get. Even the splayed valve GM SB2 heads are available. Blocks (SB2) come in dry and wet sump versions. Compression ratio is not 13:1 but 10:1 and still pump out 650hp. The cams are custom grind Comp Cams roller type for street use. Valve train is full race 8k rpm capable. Wouldn't that make a screaming SBC powered ride? The price is on the steep side but worth the bragging rights. |
I guess I should've listed what parts went into it.
Displacement: 357.08ci Compression: 10:1 Block: GM SB2 Bow Tie, cast iron Heads: GM SB2 aliminum splayed-valve Crank: Bryant billet, 3.340 in. stroke Rods: Carillo 6.200 in. Pistons: CP, 4.125 in. dished Cam: Comp Cams roller Lifters: Comp Cams roller Rockers: Jesel shaft-mounted roller Pushrods: Comp Cams 3/4 4340 steel Valves: Del West Titanium, 2.15/1.600 Intake: GM open-plenum ported by Wilson Carb: Holley 750 |
That's pretty impressive Iggy.
Thanks for posting that. It would really make for a bad-azz street ride. :cool: |
I wonder if my alphas could handle that...hmmmmm.
I do have a couple of bowtie 400 blocks currently in use. Naaaaa. I think my wife would kill me. She almost did over the last SBC's I build. |
A friend of mine is having triple 600 HP. small blocks built for an ex offshore boat (40' Activator) he picked up. Given they are blown, but should be an interesting ride.
Scott |
Ummmmmmm sign me up for two!!!
|
Ummmmmmm sign me up for two!!! |
All times are GMT -5. The time now is 03:16 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.