Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Questions about different Bravo's? (https://www.offshoreonly.com/forums/general-q/27835-questions-about-different-bravos.html)

Fountain38 07-01-2002 10:16 PM

Questions about different Bravo's?
 
I busted my prop shaft and prop housing this weekend on my Eliminator Cat. I have stock bravo's behind my 2000, 500 EFI's.
I am going to have to replace my bravo, lower unit, and have found a 2000-2001 bravo H.P. take off with 14 hours on it. I am aware of the XR's and XZ's but what does the HP mean on the bravo. The guy says he has three takeoffs from a 47 foot fountain that was upgraded with new engines and drives and he says they are Bravo HP????
He wants $2700.00 for one or 5000.00 for two. I would like to upgrade to the XZ or XR's but I don't have $14,000 right now.
Also do all Bravo's have low water pickups or not. I am going to have to install a nose cone to match my other bravo.
Any help appreciated!!!!!!:) :)

John B 07-01-2002 10:42 PM

Fountain38, I'll sell you my new Bravo HP (heavy duty Gimbal), low water P/U, 1.36 ratio drive for $3200 + freight. Never mounted, in merc box.
John 716 542 5435 days:cool:

Cord 07-01-2002 11:04 PM

Have you considered any of the xr's in the classifieds section?

Fountain38 07-01-2002 11:12 PM

Cord, I have new baby due in Aug. really don't have 10-11,000
dollars right now extra. No maternity insurance. Outta my pocket
Thanks John, ill consider that offer.

Blackhawkdn 07-01-2002 11:55 PM

If you broke just the prop shaft and lower housing, you can by replacement for under $2000.00 call IMCO, Teague or Performance Offshore in Florida. The foot is made two ways; low water pick up or mid pick up. HD has nothing to do with pick up location.

Scott 07-02-2002 09:54 AM

why does this conversation look so familiar:D :D

Cattitude 07-02-2002 10:58 AM

At least get aftermarket shafts!
 
F38- if nothin else, replace your stock 1" shafts with the same size but better alloy- I think the shafts are available for 3-500?

I bet you could get a used XR or XZ lower (They are the same- only the upper gears are different between the two) or even a used Imco lower for the same kind of coin for the stock HP lower. The HP lowers are pretty reliable- for anything but your application.

Try calling Chris at Sterndrive specialists- tell him I sent you, he took good care of me. 315 676 2979 Good luck- and you're still welcome at Beaver if you decide to.


All times are GMT -5. The time now is 12:56 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.