Not legal in MN, cannot have switchable anything

What about turn downs? A good stainless steel welding shop should be able to fabricate a set that could clamp onto your existing pipes or extend through the transom and connect to the exhaust hose. I think Gibson makes a set of clamp ons, but they are pricey.

Talk to GGb or Aqua Power Ltd about some new tips/with mufflers that will replace your existing tips. they have good technology which should get your Db sound levels down tro acceptable levels.

Regards,
Ray @ Raylar

Gibson has not really shown great interest in making them
I asked, they pointed me towards mufflers instead.
Told them I am not intested in that aspect, looking more at the turn down, but not a reply from that email :(

I have thought about this, but limited to room on the inside ports. There is only about 6 inches of hose, so less then 4" of open area between the Y diverter and the tips

Thought about pulling the Y pipe out, going straight out and then put inlines in. But then if that does not quiet it down, then what :(

Slip-ins, you can always take them out...easily.

Somebody already mention CP Performance, they have all sorts of styles, and they really do take the edge off. 10db is a lot.