Drive coupling replacement cost
 

Have a 1997 350 mag with a Bravo3 outdrive that has a bad coupling . The boat is a crowline very tight engine compartment.What is a good price to have the coupling changed?

I would expect to pay 400-600$ labor. A local boat shop pulled my original 502 once for me around here when I was swamped with paying work in my own shop and they charged me 175$ to pull it, 250$ to put it back in, Smitty

I would bet you are looking at 8-10hrs labor total plus about $400 for a coupler. Probably about $1500 total.

ouch!!

makes you realize that one better get in there and GREASE IT! :(

I agree with Griff, 1500 is realistic because the motor has to come out or at leasted lifted and turned so the bell housing can be removed

$600 labor plus parts. Coupler $470.00 from Bam marine.

10 hours labor is what I was charged to remove and install the motor. $85/hour, ugh...

10 hrs for a two hour job...nice..

Pismo10, have you ever looked at a crownline? It took me about 4-5 hour to replace mine, but I would bet my brothers 23ft crown would take 10 hours.

Must be tight in there because if you have even modest space to spin the motor some it is a fairly easy job.