What engine for fast quiet ride?
#1
Registered
Thread Starter
Join Date: Sep 2012
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
What engine for fast quiet ride?
I have a smuggler 245 s with ā penta 5.0 Gsi 250hp and penta DPS drive.
WOT give about 53 mph at 4800rpm.
The problem is that I want to Cruise at that speed but its too much noise.
Do you think a change of engine and drive to a penta dpx 500 with dpx drive would be more quiet in the same speed.
I think top speed with that engine (500 hp) Will be around 70 mph.
/
WOT give about 53 mph at 4800rpm.
The problem is that I want to Cruise at that speed but its too much noise.
Do you think a change of engine and drive to a penta dpx 500 with dpx drive would be more quiet in the same speed.
I think top speed with that engine (500 hp) Will be around 70 mph.
/
#5
Registered
iTrader: (2)
I disagree at lower rpm any engine will make less noise, is there any way to add soundproofing to the motor compartment? Obviously you will want to have thru prop exhaust with either option if you want it quiet. Don't forget you also have a substantial amount of wind noise at that speed. Where in Sweden are you? I have a few clients/ friends from Stockholm.
#6
Registered
Join Date: Jul 2004
Location: Stockholm, Sweden
Posts: 1,229
Likes: 0
Received 0 Likes
on
0 Posts
You can ask the same question on our more local Swedish forum, www.boatsite.se, and you will most likely get some answers there as well.
Tomas
Tomas
#7
Registered
Thread Starter
Join Date: Sep 2012
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
I disagree at lower rpm any engine will make less noise, is there any way to add soundproofing to the motor compartment? Obviously you will want to have thru prop exhaust with either option if you want it quiet. Don't forget you also have a substantial amount of wind noise at that speed. Where in Sweden are you? I have a few clients/ friends from Stockholm.
And yes I will put a lot of soundproofing materials in the motor compartment. A company called Karnag sells stuff for that purpose and they say that I can expect 10dB reduced sound. That sounds good to me.
#8
Registered
Thread Starter
Join Date: Sep 2012
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
You can ask the same question on our more local Swedish forum, www.boatsite.se, and you will most likely get some answers there as well.
Tomas
Tomas
Thanks for your answers.
#9
Registered
Had two friends with the same boat. One was small block powered the other had a big block. The big block boat was much louder. The owner of that boat ended up buying Silent Choice.
#10
Registered
Thread Starter
Join Date: Sep 2012
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Hello
About time I update this thread.
I changed to a penta 8,1 GI 375 hp.
With F9 props, the old where F6.
Now Max speed is 65mph at 4600 rpm
And it is much more quiet at all speeds.
I did install karnag's soundabsorbing material.
About time I update this thread.
I changed to a penta 8,1 GI 375 hp.
With F9 props, the old where F6.
Now Max speed is 65mph at 4600 rpm
And it is much more quiet at all speeds.
I did install karnag's soundabsorbing material.