Power trim hoses... LONG... who makes them?
 

I'm in the need for some longer than 72" long power trim hoses . . . does anyone make these, even custom if needed?

Mario L.

Pretty much any ag dealer ( john deere, case ect.) can make custom length lines & various size hoses, probably the most inexpensive you will find.

Fixx
 

merc boes..if you need them real long then you buy another set and add a line connector to make them longer..if custom made they may not be stainless steel..ask george carter where he had his made for his testrosa...

CP Performance will make any length with any configuration of ends that you need. They are SS braided hose with SS ends in either straight or 90* config. Call and speak with Mike at ext. 217. (1-800-225-9871) Tell him I sent you and he will fix you up.
Eddie

Parker makes a PTH-3 hose - PTH = Power Tilt Hose. A trip to your local Parker shop should be able to get you fixed up.


http://www.parker.com/portal/site/PA...0032a71dacRCRD

You could also run hard lines, with a flex line at the ends to get to the drives/pumps.

We have used Bonco hydraulic's (909-985-3429) for several projects when relocating pumps or custom installs, always fast service and good quality.

You can check with your local Napa. If they can't make them, they can probably point you to someone industrial/agriculture who can.