How much HP are my 540s?
#11
Thread Starter
Registered
Joined: Oct 2010
Posts: 368
Likes: 2
From: Ottawa, ON
Yeah the blowers are Vortec, the intercoolers are from Procharger. They are gil manifolds with custom tail pipes.
Forgot about rest of drivetrain:
-Huber 1330 Trannys
-SSM 3 turning 31p 4 blades
-Supposedly does 90 MPH on GPS...but havent had a chance to try it WOT throttle yet.
-Its a 36ft boat, same bottom hull as Baja Outlaw (the boat is a Force 10)

Forgot about rest of drivetrain:
-Huber 1330 Trannys
-SSM 3 turning 31p 4 blades
-Supposedly does 90 MPH on GPS...but havent had a chance to try it WOT throttle yet.
-Its a 36ft boat, same bottom hull as Baja Outlaw (the boat is a Force 10)

#15
#17
Registered

Joined: Jul 2007
Posts: 3,648
Likes: 32
From: Oneida Lake NY
#19
Thread Starter
Registered
Joined: Oct 2010
Posts: 368
Likes: 2
From: Ottawa, ON
LOL Yep, Jamie had some insight!
The guy did some crazy work on this thing. The 'extension box' is actually made out of aluminum and the transmissions are inside it. There is an access panel in the swim platform (aluminum) to get to the trannies. So in the engine compartment, the motors are in the same position as if they were in a Bravo set up.
That's the reason for the exhaust routing too...seems to work well in any case.
So yes, a 36' boat then an extension box added.


The guy did some crazy work on this thing. The 'extension box' is actually made out of aluminum and the transmissions are inside it. There is an access panel in the swim platform (aluminum) to get to the trannies. So in the engine compartment, the motors are in the same position as if they were in a Bravo set up.
That's the reason for the exhaust routing too...seems to work well in any case.
So yes, a 36' boat then an extension box added.


Last edited by Rambocj7; 12-04-2012 at 09:22 AM.
#20
Registered

Joined: Jul 2007
Posts: 3,648
Likes: 32
From: Oneida Lake NY
LOL Yep, Jamie had some insight!
The guy did some crazy work on this thing. The 'extension box' is actually made out of aluminum and the transmissions are inside it. There is an access panel in the swim platform (aluminum) to get to the trannies. So in the engine compartment, the motors are in the same position as if they were in a Bravo set up.
That's the reason for the exhaust routing too...seems to work well in any case.
So yes, a 36' boat then an extension box added.



The guy did some crazy work on this thing. The 'extension box' is actually made out of aluminum and the transmissions are inside it. There is an access panel in the swim platform (aluminum) to get to the trannies. So in the engine compartment, the motors are in the same position as if they were in a Bravo set up.
That's the reason for the exhaust routing too...seems to work well in any case.
So yes, a 36' boat then an extension box added.



Hope to see you in Abay this year



lol