![]() |
Originally Posted by whataride
(Post 3855725)
I'm contemplating doing the whipple upgrades on my 700s . I would like to hear from members that have done these mods on the Good ,the bad and the ugly .
|
PRECISION,please tell us more information on these turbo kits.
|
putting whipples on my 555 motors. Duston at whipple was good to deal with gave me all the help I needed.Any questions they say to call back for help....
|
Originally Posted by sport
(Post 3856707)
Are you taking about the 700sci? I have the Whipple stage 2 upgrade on my 600sci and and it was the best $2500 I have ever spend on a boat I have had no problems at all and the boat is 10 mph faster and excilerates much harder then stock, it idles and runs the same as stock until you hit the gas, it is very easy to install in about 20 minutes. The 600sci and the 700sci have all the same components except the cam and inter cooler on the 700 is bigger and it has more stock boost then the 600sci.
I have a 600 sci , did the whipple stage 2 kit got 10MPH on GPS with no problems at all . It was well worth the cost . If you have 700 sci motors now I wouldnt take all of that of for turbos.Do the upgrade you wont be disappointed Its easy to install. |
There should be some write up about the 488 Skater V ( Tborisch's Tainted Lady) when Ron aka Flight Club took ownership of it... dropped in 700's w/ stage three's I believe - only positive comments from what I recall on the threads of the Skaterfest weekend last year
|
Originally Posted by sport
(Post 3856707)
Are you taking about the 700sci? I have the Whipple stage 2 upgrade on my 600sci and and it was the best $2500 I have ever spend on a boat I have had no problems at all and the boat is 10 mph faster and excilerates much harder then stock, it idles and runs the same as stock until you hit the gas, it is very easy to install in about 20 minutes. The 600sci and the 700sci have all the same components except the cam and inter cooler on the 700 is bigger and it has more stock boost then the 600sci.
|
Originally Posted by whataride
(Post 3857465)
Thanks for the input , did you do the work yourself ?
|
Hey Whataride, wher in the 1000 islands are u?
|
I had done the whipple upgrades to my 700. Just be careful the motors are hydraulic rollers don't rev much over 5500. Keep in mind small oil pans change the oil as much as you can. Use good oil as well. Other than that Dustin was great to deal with.
|
Originally Posted by rivermonkey
(Post 3857987)
Hey Whataride, wher in the 1000 islands are u?
|
| All times are GMT -5. The time now is 09:04 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.