Offshoreonly.com - Whipple upgrades on 700 merc

Page 3 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Whipple upgrades on 700 merc (https://www.offshoreonly.com/forums/general-q/290651-whipple-upgrades-700-merc.html)

whataride

01-30-2013 10:37 AM

Quote:

Originally Posted by 43sv (Post 3858044)

I had done the whipple upgrades to my 700. Just be careful the motors are hydraulic rollers don't rev much over 5500. Keep in mind small oil pans change the oil as much as you can. Use good oil as well. Other than that Dustin was great to deal with.

Thanks for the input

whataride

01-30-2013 10:40 AM

Quote:

Originally Posted by sport (Post 3857524)

Yes but my boat is single engine so it is no big deal getting at the engine, you will be with out a boat for a week or two because you have to take the computers off of the engines and send them to Whipple to be reprogramed.

That will not be a problem right now , to many ice bergs out there to do any boating

BobbyB

01-31-2013 11:42 AM

We have done a few and the boats are running solid. We did change rocker arms on the motors also.

whataride

02-02-2013 09:57 AM

Quote:

Originally Posted by BobbyB (Post 3859011)

We have done a few and the boats are running solid. We did change rocker arms on the motors also.

Was the rocker arm. And lifter replacement recommended by whipple

All times are GMT -5. The time now is 07:28 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page