Originally Posted by 43sv

I had done the whipple upgrades to my 700. Just be careful the motors are hydraulic rollers don't rev much over 5500. Keep in mind small oil pans change the oil as much as you can. Use good oil as well. Other than that Dustin was great to deal with.

Originally Posted by sport

Yes but my boat is single engine so it is no big deal getting at the engine, you will be with out a boat for a week or two because you have to take the computers off of the engines and send them to Whipple to be reprogramed.

Originally Posted by BobbyB

We have done a few and the boats are running solid. We did change rocker arms on the motors also.