|
Originally Posted by GPM
(Post 3865366)
That's backwards, 400 sbc is external, 350 is internal balance. A 383 can be either depending on what parts you use.
. Still had to run a 400ci flywheel and you can see they are weighted . They do have a weighted plate that slides over your rear crank bolts meant to be run with the 350ci flywheel but i didn't like that , it's still hangin on the garage wall . |
Originally Posted by GPM
(Post 3865366)
That's backwards, 400 sbc is external, 350 is internal balance. A 383 can be either depending on what parts you use.
|
Originally Posted by Trash
(Post 3866270)
That's what I meant. I had a moment of balance dyslexia.:drink:
|
Originally Posted by the deep
(Post 3866276)
I have that every now and again but it's alcohol induced . :ernaehrung004:
|
Hi,
I have an interally balanced 4340 steel crank ( scat) if this is done I need to use a flywheel which has no wheights. Is it right or did I have a misunderstanding? |
Correct, If you have an internally balanced motor run a neutral balance flywheel and balancer(no weight).FWIW a 383could be either.
|
| All times are GMT -5. The time now is 06:48 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.