Better of the Two Drive Showers
#11
Registered
Join Date: May 2006
Location: Huntsville, AL
Posts: 1,628
Likes: 0
Received 0 Likes
on
0 Posts
depends on how much. I have IMCO steering, so not sure if they have one that works with the front panel that has the attachment points like below:
But if so i would need 2 as well possibly.
this is my set up
But if so i would need 2 as well possibly.
this is my set up
#17
Registered
Join Date: May 2006
Location: Huntsville, AL
Posts: 1,628
Likes: 0
Received 0 Likes
on
0 Posts
#19
Registered
Join Date: May 2006
Location: Huntsville, AL
Posts: 1,628
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the pics! But thats the problem. My IMCO front cover on the top of the drive is where my haydrolic rams connect. will try and find a better picture of what i a dealing with. but the halos cant come around the front of the top of the drive.
this is dark but my exact boat, see how the rams, and the tie bar is connect to the front cover on the top of the drive.
here is another shot:
This is a standard bravo one. the halo would work on that.
but when you change out that front plate (hold on with 2 bolts) with something like this. the halo cant go around the front of the drive
Last edited by mittens; 03-28-2013 at 08:44 AM.