Go Back  Offshoreonly.com > Technical > General Q & A
Merc 600's info? >

Merc 600's info?

Notices

Merc 600's info?

Thread Tools
 
Old 07-23-2002, 11:40 AM
  #1  
Registered
Thread Starter
 
jawbreakerkid's Avatar
 
Join Date: May 2001
Location: IL / LOTO
Posts: 1,965
Received 21 Likes on 11 Posts
Question Merc 600's info?

does anyone have any tech info on the merc 600's? what block, blower, carbs, boost, etc.? what kind of hp/torque at what rpm ranges are they producing? what kind of experiences have you had with these motors? how many normal hours can be expected out of them before a rebuild?

any info or links to info would be appreciated.

thanks in advance....

chad
jawbreakerkid is offline  
Old 07-23-2002, 12:13 PM
  #2  
Brad Perry
Guest
 
Posts: n/a
Default

I think they were 540ci with B&M 420s.
 
Old 07-23-2002, 12:57 PM
  #3  
Registered
Thread Starter
 
jawbreakerkid's Avatar
 
Join Date: May 2001
Location: IL / LOTO
Posts: 1,965
Received 21 Likes on 11 Posts
Default

thanks for the info, brad.

anyone else?????

chad
jawbreakerkid is offline  
Old 07-23-2002, 01:03 PM
  #4  
Charter Member
Charter Member
 
IRONMAN's Avatar
 
Join Date: Jan 2001
Location: south east of dome island
Posts: 1,235
Received 2 Likes on 2 Posts
Default

They are 502's with the megablower, dual holley 750's and cmi exhaust.
IRONMAN is offline  
Old 07-23-2002, 01:17 PM
  #5  
Registered
Thread Starter
 
jawbreakerkid's Avatar
 
Join Date: May 2001
Location: IL / LOTO
Posts: 1,965
Received 21 Likes on 11 Posts
Default

did they all have dual 750's on them? the picture i have of the motors sitting in a cig do not have dual 750's on them....
Attached Thumbnails Merc 600's info?-boat3a.jpg  
jawbreakerkid is offline  
Old 07-23-2002, 02:13 PM
  #6  
Brad Perry
Guest
 
Posts: n/a
Default

Those are also not B&M 420 megablowers either.
 
Old 07-23-2002, 04:50 PM
  #7  
Registered
 
later's Avatar
 
Join Date: Oct 2000
Location: Chesterfield Mo/Loto
Posts: 1,378
Likes: 0
Received 11 Likes on 2 Posts
Default

JBK 600'S

the 600's were 502 ci motors with 7.5 compression used the B&M 420 megablower they were rated at 550 at the prop, rpm range was 4800-5200. they would make more power if you ran them with more rpm and boost which i believe in stock trim they ran approx. 5lbs of boost. with a minumum octane of 91 and 93 the perfered choice. they only came as a bobtail and were rough on bravo's.
later is offline  
Old 07-23-2002, 05:09 PM
  #8  
Registered
Thread Starter
 
jawbreakerkid's Avatar
 
Join Date: May 2001
Location: IL / LOTO
Posts: 1,965
Received 21 Likes on 11 Posts
Default

later- thanks for the info! with only 5lbs of boost, i would think the reliability/longevity would be decent. either way, with 230 original hours, i'm still looking at a rebuild in the very near future.

are you going to be at the lake this weekend? i'll probably be down, but it will be a working weekend for me. i'm finishing moving into the new place and then probably cleaning on the boat, changing oil, etc.

thanks again,
chad
jawbreakerkid is offline  
Old 07-24-2002, 01:05 PM
  #9  
Registered
 
later's Avatar
 
Join Date: Oct 2000
Location: Chesterfield Mo/Loto
Posts: 1,378
Likes: 0
Received 11 Likes on 2 Posts
Default

JBK

i take it your looking at a 38 cig with 600's


I would think that at 230hrs you wouldnt get to many moer hrs before rebuilds. although i have read were some of the blower motors go into the 400hrs im sure there pretty tired. i will be down this weekend having a relaxing weekend. had all my guy's and their wifes that work for me down for a bbq last weekend about 26 people and i was wopped entertaining and all (hard work) making sure everyone is having a good time. ill be piddling this weekend wax the boat etc. hopefuly your moved into your new place and have found a place for everything by now are found everything sometimes thats a chore unpacking and all. ill look for you on the water and if your up my way stop by and ill by you a drink.
later is offline  
Old 07-24-2002, 01:16 PM
  #10  
Registered
Thread Starter
 
jawbreakerkid's Avatar
 
Join Date: May 2001
Location: IL / LOTO
Posts: 1,965
Received 21 Likes on 11 Posts
Default

yep, i've always had a thing for that boat. i used to see it flying up and down the lake when Brian Foster owned it. i'm actually looking for a late model T/S, but old memories die hard...LOL.

i'll look you up if i'm up at your end of the lake. thanks again!

chad
jawbreakerkid is offline  


Quick Reply: Merc 600's info?


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.