steering ram leaking
 

how hard are they to pull apart and reseal? looks fairly simple but the easy crap usually turns out to be the hard stuff

Ive never done a boat steering ram but reg hydraulics are easy. O ring seals inside. If your worried any local shop hydraulic shop should be able to handle fairly inexpensive. Biggest issue is no Knicks or dings in metal.

yes that's what I was thinking, hyd shop.

they should be simple

Mine are Marine Machine and here is my thread. Getting the seals in the ends are a PIA.
http://www.offshoreonly.com/forums/g...s-rebuild.html