Offshoreonly.com - Thinking about replacing the dash and gauges on my 35' Fountain Lightning

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Thinking about replacing the dash and gauges on my 35' Fountain Lightning (https://www.offshoreonly.com/forums/general-q/299543-thinking-about-replacing-dash-gauges-my-35-fountain-lightning.html)

kmeyer64

07-10-2013 10:59 AM

Thinking about replacing the dash and gauges on my 35' Fountain Lightning

Looking to replace the dash and put in new gauges on my boat, but the wiring looks like a nightmare. Does anyone have a suggestion or looking to see if there is a template that exists for this.

ttuton

07-10-2013 11:52 AM

I believe that there is a connector that allows you to disconnect the entire assembled dash and remove it. This should make it a lot easier to put together a new dash.

kmeyer64

07-10-2013 12:33 PM

This is a '96 Fountain and I was wondering if there is a template with all the wires labeled and I was planning on putting the trim in the shifters do I need an adapter to put it from the steering wheel?

All times are GMT -5. The time now is 03:18 PM.