Cam specs? whats duration at.050??
#1
Gold Member
Gold Member
Thread Starter
iTrader: (5)
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,634
Likes: 0
Received 204 Likes
on
132 Posts
Cam specs? whats duration at.050??
My custom ground cam only has the advertised duration engraved, I do not have the cam card....
trying to see what duration it is....
I do know...
ground 114LCA
Says advertised duration 302/310
lift is .578
its erson.... cannot find what duration is @.050
how do I find that out??
trying to see what duration it is....
I do know...
ground 114LCA
Says advertised duration 302/310
lift is .578
its erson.... cannot find what duration is @.050
how do I find that out??
#4
Gold Member
Gold Member
Thread Starter
iTrader: (5)
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,634
Likes: 0
Received 204 Likes
on
132 Posts
Yes that's the only thing I don't know... My buddy had a engine builder that I would have shot hence the reason I build my own stuff but this was a deal so I grabbed the boat....
I know he built them very conservative using small cams for the CI... I plan to change things in a couple years or if I hurt one and rebuild... These can make 675-700 hp easily...
Right now they are 598hp@5200 659tq@4200
Hp is 597-598 from 5100-5400 then drops off...
Tq peaks 4200 but still hold 607@5200 so 5200 is about what I wanna prop at also
I know he built them very conservative using small cams for the CI... I plan to change things in a couple years or if I hurt one and rebuild... These can make 675-700 hp easily...
Right now they are 598hp@5200 659tq@4200
Hp is 597-598 from 5100-5400 then drops off...
Tq peaks 4200 but still hold 607@5200 so 5200 is about what I wanna prop at also
#8
MarineKinetics
Platinum Member
Full Force,
The cam is a derivative of the shelf cam:
E120207
RH-302-2
234º/242º @ .050"
.340"/.340" Lobe
Ground on a 114º Lobe sep
Attached is the cam card for theat cam on a 112º sep, measured with a 1.72 rocker ratio.
Bob
The cam is a derivative of the shelf cam:
E120207
RH-302-2
234º/242º @ .050"
.340"/.340" Lobe
Ground on a 114º Lobe sep
Attached is the cam card for theat cam on a 112º sep, measured with a 1.72 rocker ratio.
Bob
#9
Gold Member
Gold Member
Thread Starter
iTrader: (5)
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,634
Likes: 0
Received 204 Likes
on
132 Posts
So it's close to that? What's the 310 for on the back? Any idea? This cam seems small for 547ci aluminum head engines 320cc runners I think I have that info at home
#10
MarineKinetics
Platinum Member
Yours is identical to the catalog cam sheet posted, with the exception of yours is ground on a 114º lobe separation angle, and the catalog cam has been ground on a 112º LSA. Duration, lift etc. is all the same.
the 302º/310º designates the seat, or measured duration. I posted the catalog cam to give you a look at the lobe architecture.
"Hp is 597-598 from 5100-5400 then drops off..."
That is typical of that duration for that displacement, power will plateau, dropping off due to pumping losses.
Bob
the 302º/310º designates the seat, or measured duration. I posted the catalog cam to give you a look at the lobe architecture.
"Hp is 597-598 from 5100-5400 then drops off..."
That is typical of that duration for that displacement, power will plateau, dropping off due to pumping losses.
Bob