Offshoreonly.com
Page 4 of 6
« First
2
3
4
5
6
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   prochargers and boost (https://www.offshoreonly.com/forums/general-q/302970-prochargers-boost.html)

ICDEDPPL 09-17-2013 06:49 PM
Its the river.. if it was ran on the lake all would be fine.. the river is a jinx!!!

MILD THUNDER 09-17-2013 06:52 PM
Originally Posted by MILD THUNDER (Post 3996951)
Smitty, CNC, What are you higher boost guys running for plugs? Heat range wise.

Also, what is your target AFR at wot?
anyone?

mike tkach 09-17-2013 06:53 PM
Originally Posted by ICDEDPPL (Post 3997618)
Its the river.. if it was ran on the lake all would be fine.. the river is a jinx!!!
yep,and the lake water is colder.

GPM 09-17-2013 07:55 PM
The M5 cooler might work a little better than the 4.

FIXX 09-17-2013 08:21 PM
Originally Posted by MILD THUNDER (Post 3997594)
NO WAY! Those intercoolers are magical! You can run 40psi on 87 octane if you have one!
+1!!! and you have to feed the intercooler off the water crossover that is mounted to the engine which also goes through a oil cooler b4 it even hits the engine....this wat you have all your base's covered lol..no need to lwp's this way and no starving the cooler of water either..

WETTE VETTE 09-17-2013 09:08 PM
Originally Posted by MILD THUNDER (Post 3997622)
anyone?
-9's low to mid 11's.

MILD THUNDER 09-17-2013 09:12 PM
Originally Posted by WETTE VETTE (Post 3997757)
-9's low to mid 11's.
Wow!!!! Where you been hiding!!!! Someone told me you've moved on from the go fasts and are working part time at bass pro shops in the rigging dept? Lol

Craig , what's your thought on a projected tip -8 plug with 15psi?

mike tkach 09-17-2013 09:13 PM
Originally Posted by WETTE VETTE (Post 3997757)
-9's low to mid 11's.
perfect!

WETTE VETTE 09-17-2013 09:14 PM
Originally Posted by MILD THUNDER (Post 3997759)
Wow!!!! Where you been hiding!!!! Someone told me you've moved on from the go fasts and are working part time at bass pro shops in the rigging dept? Lol

Craig , what's your thought on a projected tip -8 plug with 15psi?
I won't run a projected tip plug on anything with a power adder.

WETTE VETTE 09-17-2013 09:17 PM
And yes I have slowed down temporarly. The Kings like a 2.5-3.2 troll so thats were I'm at. Still plenty of motors to tune and friends to give me a ride from time to time.


All times are GMT -5. The time now is 03:36 AM.
Page 4 of 6
« First
2
3
4
5
6
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.