|
Love the boat, this my second 28 heat my first was a 1998 that I built a 865 hp blown 509 and Nordic installed it when they built the boat and I never had any problems with it, I sold it to a good friend in 09 and I had this 2010 built I just wanted something turn key this time so I got the 600sci and did the whippel kit when it had 13 hour on it, so far so good no issues yet but I keep a pretty close eye on things. This boat is a little faster with less power I think because it has a step in the bottom and its a little lighter because they don't use wood any more and the drive is mounted higher. Thanks for the info I will check Max's out in a couple weeks when I'm down there doing some maintenance on the boat.
We should get together some time when I am in Havasu and have a cold one on the lake. John |
I've got 130 Hrs on mine, stone stock, and they run flawlessly! Couldn't be happier, and we have to idle ~20 minutes to get on plane . Just getting ready to change the oil/filters today, BTW, how does everyone get their oil filter off w/out making a mess? I just barely crack the seal on the filter, and let it "burp" it out, although it takes forever, and sometimes it will dribble... Thought about taking a punch and driving an air bleed hole in the top of the oil filter and just letting it drain out that way... Anyone try that?
Thanks, Dean |
|
[IMG]http://i982.photobucket.com/albums/a...ps26481cec.jpg[/IMG]
Originally Posted by tnc110
(Post 4006494)
600sci in a deckboat...pics please...sleeper!!!!
|
|
Here is a picture of the gear oil heat exchanger that picks up lake water and cools the gear oil. It is pumped through the gear case by a 12 volt pump not seen in photo.[IMG]http://i982.photobucket.com/albums/a...psb5fbbe64.jpg[/IMG]
|
Originally Posted by Dean Ferry
(Post 4007191)
I've got 130 Hrs on mine, stone stock, and they run flawlessly! Couldn't be happier, and we have to idle ~20 minutes to get on plane . Just getting ready to change the oil/filters today, BTW, how does everyone get their oil filter off w/out making a mess? I just barely crack the seal on the filter, and let it "burp" it out, although it takes forever, and sometimes it will dribble... Thought about taking a punch and driving an air bleed hole in the top of the oil filter and just letting it drain out that way... Anyone try that?
Thanks, Dean |
Originally Posted by sport
(Post 4007170)
Love the boat, this my second 28 heat my first was a 1998 that I built a 865 hp blown 509 and Nordic installed it when they built the boat and I never had any problems with it, I sold it to a good friend in 09 and I had this 2010 built I just wanted something turn key this time so I got the 600sci and did the whippel kit when it had 13 hour on it, so far so good no issues yet but I keep a pretty close eye on things. This boat is a little faster with less power I think because it has a step in the bottom and its a little lighter because they don't use wood any more and the drive is mounted higher. Thanks for the info I will check Max's out in a couple weeks when I'm down there doing some maintenance on the boat.
We should get together some time when I am in Havasu and have a cold one on the lake. John John, Give me a heads up when you are out at Havasu. I visit there fairly often. I would love to meet you. |
Interior of Howard Deckboat. This is a 2007 model and very plain inside. I like it just white because it does not get as hot[IMG]http://i982.photobucket.com/albums/a...psaca31502.jpg[/IMG]
|
Very nice boat! Would you mind posting pics of the oil pump and routing for your drive oil cooling setup? I'm in the process of designing a bypass filter and cooler on my bravo. Thx!
|
| All times are GMT -5. The time now is 05:19 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.