Originally Posted by Revd Up (Post 4056605)

Here's mine. Yours looks the same, except it appears to be 1 or 2" shorter.
http://i1133.photobucket.com/albums/...ps6f04c0dd.jpg

Originally Posted by pwrboatn (Post 4056643)

Thanks for posting this for me Eddie. Whats it worth If it is an imco? As-is....Operates fine without any noises, not sure of hours or last time it was gone over. Ill check for the stamps tonight to try and be sure it is an imco.

Originally Posted by Drock78 (Post 4056608)

You have an excessive amount of shiny things sir..

Originally Posted by Revd Up (Post 4056598)

Looks like an Imco to me. Should have a mark stamped in the housing -0, -1 or -2. Meaning standard length, 1" shorter or 2" shorter. The stamping would be forward of the vertical shaft, right at the front point of the drive on the horizontal flat surface. In the 3rd picture it would be on the right,under the dirt at the point of the drive.