|
Originally Posted by cstraub
(Post 4066824)
Calling someone by their first name here in the south is called respect. Even if you don't care for the person, we are still human, we still have families. I apologize if you don't understand this.
|
Originally Posted by sutphen 30
(Post 4066777)
well the con man thinks he's smarter than Rmbuilder.
|
Originally Posted by cstraub
(Post 4066764)
Bob,
Just had a customer come to me with a 434CID SBC that does not run, runs slower than this 406CID. He wants a cam change. I remembered talking to him several months ago and at that point we discussed his oil pan and headers. Pan is not a rail kick out, headers are 1 5/8". I asked him if he had changed the headers and pan. He said no. I told him no cam change was going to improve the car until he got the supporting components to achomplish his goals. If we advise the customer on what to do and he chooses not to all of it then we have NO CONTROL. Lightning, CMI, or Stellings Headers ? Full wet or dry to the tip ? |
Aren't you guys done bickering and screwing up johnnyboatman's thread yet???????????????:whistle:
|
Originally Posted by Griff
(Post 4066981)
Aren't you guys done bickering and screwing up johnnyboatman's thread yet???????????????:whistle:
ONLY IF THE ZOMBIES HAVE LEFT THE SITE..... By the way the OP got the proper answer on the first page, he just needed more reassurance that took a couple hundred post to get him to agree. By the way Griff with almost 13000 posts I am sure you have fluffed a few threads along the way. |
hell I gave up with this after the first few days, post away
|
All the things said about straub is absolutely true. The cam I bought from him was 100% junk and didn't perform well at all. I say 100% because its on a cast core and its not even worth having it reground into a usable piece. My advice to anyone is to stay far away from this guy as possible. He stands behind nothing that he sells and gets top dollar for it.
|
Originally Posted by Mrcapsize
(Post 4079142)
All the things said about straub is absolutely true. The cam I bought from him was 100% junk and didn't perform well at all. I say 100% because its on a cast core and its not even worth having it reground into a usable piece. My advice to anyone is to stay far away from this guy as possible. He stands behind nothing that he sells and gets top dollar for it.
I try to warn as many as possible that this is a guy(and aa few others) that doesn't even know how to change an intake on a bbc. Says volumes when Rmbuilder responds to this azzclown(cslob). |
Originally Posted by Mrcapsize
(Post 4079142)
All the things said about straub is absolutely true. The cam I bought from him was 100% junk and didn't perform well at all. I say 100% because its on a cast core and its not even worth having it reground into a usable piece. My advice to anyone is to stay far away from this guy as possible. He stands behind nothing that he sells and gets top dollar for it.
|
Bill your responses and name calling like you do come from children, not a so called business owner. It's funny how I'm suppose to have all these unhappy customers but when you google search custom cams Straub Technologies comes up on the first page. I wish you good luck Bill.
|
| All times are GMT -5. The time now is 09:14 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.